Steroidify
Napsgear - The Largest and Most Trusted
Purity Source Labs
Your Muscle Shop
GearChurch
Platinum Pharmaceuticals
Omega
Savage Labs
Geneza Pharmaceuticals
Ask an IFBB Pro
MusclePay
BulkoLabs

Mixed Test E with Decca & it ended up being Cloudy?

Status
Not open for further replies.
M

MuscleGod

Well-known member
Mixed Test E with Decca & it quickly turned very cloudy… tossed it away & mixed a new dose with same cloudy results? Anyone know what’s a possible reason for that, & if its still gtg without causing crippling pip?

Also the Test E is in Sunflower oil & Decca I think in MCT if that helps

Thanks for any feedback!
 
If it wasn’t cloudy to begin with I’d say you probably shouldn’t have thrown it away, it’s fine.
 
Nobody’s going to be able to answer if it’s gonna give you crippling pip, you can’t determine that prior…
 
I would just leave them separate, I’d rather do 2 pins than waste gear. I’m sure the reason it’s clouding up isn’t something crazy or dangerous, but if it makes you uncomfortable I wouldn’t ref do it.
 
Are you getting PIP? I would start buying TestC. Some people will get pip more often with E than C. But for me personally? Never got PIP from stacking Deca and test. That is one of my favorite stacks. And on the cloudy issue. Seems like maybe two different oils and it’s a color thing. Not a cloudy thing. But you got to be comfortable with it. Me. I’d jam it and slam it. 😂. Especially if you have injected both of these solo with no issues. I am all about pinning less if possible.
 
Last edited:
@John I remember this happend years ago but it was caused my some water or alchol mixing in, can’t remember exactly so I thought that was the case this time until I mixed a new one which also ended up cloudy
 
@TBU I usually don’t get pip, also this Test E is actually my first time using it, so maybe that’s just how it looks when mixed with diffrent oil, i’ll go ahead & pin the mix anyways lol I was mainly curious on what caused that.

Thanks for all your feedbacks!
 
Screenshot_20200328-043937_Gallery
 
So yesterday when getting ready to pin, I took a closer look in front of a bright light & I saw a lot of debris floating around… what the hell could that be? doesn’t look like normal crashing if that’s what it is?
 
It could be pieces of the rubber stopper, how many times have you poked it and with what gauge?
 
Its the syringe, & its a new vial so it had its first poke with a 23g
Also both vials were clear before the mix, its very strange how they turn up after mixed, even after being heated up for 30 mins.
@McSwickles yes one of the sponsors here but I wouldn’t blame them because the vials were fine before mixing them lol
 
Last edited:
I’d use it, was that syringe in the packaging before use? Just curious as the lettering is faded and looks like it may have been scraped a bit?
My syringes are always in their individual package and I don’t open till use.
 
Last edited:
Status
Not open for further replies.
Back
Top