Harm reduction month in November at ugmuscle EXTENDED into December

[SKYBOUND_423]

So I need to use like a A and B or something on NPP?

And I did B and D on Primo, and neither of them matched the color for Primo. Is that wrong or am I confused?

 

[Bigmurph6]

Read the directions brother lol

You need to use the 2 amps that are on the color sheet for the compound being tested.
If testing primo you use A or B and D to test and the D test is very important that it starts out one color and changes to the second color after the ball has been placed in the D amp. Take the D amp and roll the liquid onto the sides of the amp after the color reaction so that the light can pass through and you can see the actual color of the liquid. Also only use 6 drops per amp or a match head amount of orals.

Npp is the same it will show you the amps to use on the color reaction sheet A or B depending upon if you have the blacklight and then which ever it says to use for the second amp I don’t have my sheet with me right now.

You will see a reference in the bottom right corner of the color reaction sheet that will tell you what all the symbols mean on the chart and which amps to use with each compound.
Next to that is the step by step instructions on how to use each amp ABC&D.

 

[Bigmurph6]

My opinion is contact paramexer and get this worked out. That’s the first step and if you have problems post them up and tag me in to the post @Bigmurph

 

[Bigmurph6]

Its definitely not methenolone enanthate that’s for sure and the npp also looks way off

 

[SKYBOUND_423]

Yes, I tested the 2 recommended ones for the Primo, which on the chart is B and D. I will retest both again because on NPP I only tested the A amp. And it turned out more like Test P, as shown in this picture. Even on the D tests for Primo, it never started as light brown, went start to light purple.

I would like to know how the primo @N8GainTrain tested turned out for him, if it was similar.

Thanks @Bigmurph

 

[Bigmurph6]

I believe that it was similar but I don’t remember alot of shit going on lately

 

[SKYBOUND_423]

I gotcha man, thanks

 

[N8GainTrain]

I’ll get back to y’all on this in a little while. I’m just leaving the boxing gym, so when I get home I’ll chime in on this.

 

[N8GainTrain]

@SKYBOUND_423
Sorry I never got around to posting last night, It was kinda late when I got home.

Back in September when I did the roidtest on on his Primo E 100 I also used test amps B & D (which by the way are the correct amps). From what I can see both amps clearly showed they were negative for Primobolan Enanthate and positive instead for Masteron Propionate.

Here are the photos of the 20ml vial I tested as well as photos of amps B & D along with color chart and corresponding colors.

 

[N8GainTrain]

Amp B
Not the orange/rust color for Primo but instead the exact brown as Mast P

Test Amp D
Amp D
The same purple instant reaction and then after 15 minutes a deep purple as shown for Masteron Propionate and not the tan initial color or timed color reaction after 15 minutes shown.

 

[TG1]

Bump

 

[SKYBOUND_423]

I had the same results @N8GainTrain. The first color was the same light purple and turned to a dark purple. My B sample was the same as well. The bottle in front is what I tested.

 

[Stratfordave]

Curious, any information shared by the sponsor regarding this situation.

 

[N8GainTrain]

I can share the information that I know and am aware of. I dont know if Paramexer has posted or if he’s even allowed to. Although I haven’t spoken to him in 2-3 days and I don’t know what the current situation is but I have had a couple of conversations with him in which he has informed me that he’s waiting on his test kits/more tests to arrive so he can run tests himself. He has also informed me that it was in fact a raws issue and that he was unaware at the time but is now working to correct the issue so he can eventually continue to do business. This is an ongoing process that he seems to be working to correct.

I have training camp getting under way in about 3 weeks so my focus will soon be off of this issue and others and onto the task at hand and getting my job done.

 

[SKYBOUND_423]

I sent an email yesterday as well, so if I hear anything I will update as well.

Thanks for the info @N8GainTrain

 

[Bigmurph6]

I have been in contact with paramexer this entire time.
He is working on getting things straightened out across the board so that he can get his verification back and be a sponsor again shit happens and it definitely happened to him but he is working on getting things straight.
Until then though he is on DNO and his category is red. If he gets everything taken care of he will get verified again if not then everyone knows what happens then if anyone has an issue they need to post it publicly and tag me in and then will get it taken care of I look forward to having paramexer back he has been a sponsor for 2 years and until now hasn’t had any serious issues.

I want to thank @N8GainTrain for posting up his pics and everyone else who has participated in harm reduction months and for keeping our community safe.

I would really like to see roidtests done on other sponsors so that we can all make sure that all our sponsors are keeping everything at the highest standards.

Thanks again to everyone
Banned

 

[SKYBOUND_423]

Here is your test results for the Test ISO you wanted to see @Bigmurph

Test A

Test B

 

[Stratfordave]

Test seems to correspond with test prop, correct?

 

[SKYBOUND_423]

That’s how I see it as well, but with it being similar to a prop ester, I dont know how it should turn out, either like that or sust…? There isn’t a color match for ISO. It did not change in the UV light though. @Bigmurph - opinions?

 

[Bigmurph6]

The roidtest doesn’t test for iso it doesn’t have a color match available.

The only thing that you can do is actually use a D amp and if it turns purple it would just mean that it does have hormone in it but if its iso can’t be tested.