Chromatography results for our products - purity, dosage, quantity!

[Steroidify_Rep]

For more results please check:

https://anaboliclab.com/lab-results/...harmacom-labs/

Simec AG - www.simec.ch is an independent laboratory located in Switzerland. As a private service, Simec AG conducts chemical and microbiological analyses under EN 17025 and GMP.

Each report has an individual number and all results are verifiable. E.g. if you would like to verify this TEST-P lab test, contact Simec AG and and request an authenticity check for the report C55119. The number is located on the upper right corner of the test report page. The authenticity verification request is identical for any other products of ours tested at Simec AG.

more results on: Steroidify.com | Independent and customer lab test results for listed products

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

• EXEMESTANE + LETROZOLE + PRIMOBOLAN 200mg - - New reports released. + BOLD 300 !!!

Some reports may have +/-10% deviations …they are normal and considered as a pass.

Simec AG - www.simec.ch - is an independent laboratory located in Switzerland. As a private service, Simec AG conducts chemical and microbiological analyses under EN 17025 and GMP.

Each report has an individual number and all results are verifiable. E.g. if you would like to verify these lab results, contact Simec AG and and request an authenticity check for the report C55108. The number is located on the upper right corner of the test report page. The authenticity verification request is identical for any other products of ours tested at Simec AG.

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

August 4, 2017 By Anabolic Lab:

Pharmacom Labs PHARMA Bold 500 Lab Test Results

Pharmacom Labs PHARMA Bold 500 is presented in a 10-milliliter multidose vial and reportedly contains 500 milligrams of boldenone undecylenate per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of May 15, 2017 and June 23, 2017.

The samples were forwarded and received by the analytical laboratory SIMEC AG on June 23, 2017. SIMEC performed HPLC-UV quantitative dosage testing, ‘total aerobial microbiological count’ (TAMC) testing and ‘total yeast and mold count’ (TYMC) testing. The report was completed on July 24, 2017.

The product was identified with code number “604331” and an expiration date of July 2017. The quality code “czurnd4izs” was successfully used to verify the authenticity of the product on Pharmacom Labs - Code Site.
Label claim: Pharmacom Labs PHARMA Bold 500 has a label claim of 500 mg/ml boldenone undecylenate.

Actual content: Pharmacom Labs PHARMA Bold 500 was determined to have an actual content of 581.2 mg/ml boldenone undecylenate.

No microbiological contamination was detected.

Discuss the Pharmacom Labs PHARMA Bold 500 lab test results on the AnabolicLab Forum.

(The following images are photographs of the actual product that was submitted for testing.)

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

Here are the latest internal purity lab reports for several of our products.
They don’t have any detailed and general descriptions or official stamps because they are strictly for own production needs.

We rarely post internal results as they can be justly questioned. However, we do these tests very often but we usually prefer to share results only for tests made by third parties, independent entities like Simec or ChemTox.

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

https://hardcore-underground.net/

Latest SIMEC results - Halotestin & arimidex.

More results at: LAB TESTS | Independent and customer lab test results for listed products at PharmacomStore.ws

Simec AG - www.simec.ch is an independent laboratory located in Switzerland. As a private service, Simec AG conducts chemical and microbiological analyses under EN 17025 and GMP.

Each report has an individual number and all results are verifiable. E.g. if you would like to verify this TEST-P lab test, contact Simec AG and and request an authenticity check for the report C58851. The number is located on the upper right corner of the test report page. The authenticity verification request is identical for any other products of ours tested at Simec AG.

more results on: Steroidify.com | Independent and customer lab test results for listed products

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

New lab results of our products, courtesy of AnabolicLab.com

Deca 600; Test-P 100; Dianabol.

More results at: Steroidify.com | Independent and customer lab test results for listed products

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

Pharmacom Labs PHARMA Stan 50 is presented in a ten-milliliter multi-dose vial and reportedly contains 50 milligrams of stanozolol per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of June 23, 2017 and August 14, 2017.

The samples were forwarded and received by the analytical laboratory SIMEC AG on August 14, 2017. SIMEC performed HPLC-UV quantitative dosage testing, ‘total aerobial microbiological count’ (TAMC) testing and ‘total yeast and mold count’ (TYMC) testing. The report was completed on September 18, 2017.

The product was identified with a product number “604331”, an expiration date of June 2017. The verification code “4i0tkxim0s” was successfully used to verify the authenticity of the product on Pharmacom Labs - Code Site.
Label claim: Pharmacom Labs PHARMA Stan 50 has a label claim of 50 mg/ml stanozolol.

Actual content: Pharmacom Labs PHARMA Stan 50 was determined to have an actual content of 56.5 mg/ml stanozolol.
No microbiological contamination was detected.

Discuss the Pharmacom Labs PHARMA Stan 50 lab test results on the AnabolicLab Forum.

(The following images are photographs of the actual product that was submitted for testing.)

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

Latest SIMEC reports - More results at: Steroidify.com | Independent and customer lab test results for listed products

https://hardcore-underground.net/

https://hardcore-underground.net/

Simec AG [web] is an independent laboratory located in Switzerland. As a private service, Simec AG conducts chemical and microbiological analyses under EN 17025 and GMP.

Each report has an individual number and all results are verifiable. E.g. if you would like to verify this TEST-E 300 lab test, contact Simec AG and and request an authenticity check for the report C64442. The number is located on the upper right corner of the test report page. The authenticity verification request is identical for any other products of ours tested at Simec AG.

http://www.simec.ch/en/kontakt-us.html

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

Pharmacom Labs Pharma Mix 3 is presented in a ten-milliliter multi-dose vial and reportedly contains the following three steroid compounds: 200 milligrams of testosterone enanthate, 200 milligrams of nandrolone decanoate and 100 milligrams of trenbolone enanthate per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of October 15, 2017 and December 1, 2017.
The samples were forwarded and received by the analytical laboratory SIMEC AG on December 1, 2017. SIMEC performed HPLC-UV quantitative dosage testing, ‘total aerobial microbiological count’ (TAMC) testing and ‘total yeast and mold count’ (TYMC) testing. The report was completed on January 16, 2018.
The product was identified with a product number “604331” and an expiration date of June 2020.

Label claim: Pharmacom Labs Pharma Mix 3 has a label claim of 200 mg/ml testosterone enanthate, 200 mg/ml nandrolone decanoate and 100 mg/ml trenbolone enanthate.

Actual content: Pharmacom Labs Pharma Mix 3 was determined to have an actual content of 206.9 mg/ml testosterone enanthate, 250.0 mg/ml nandrolone decanoate and 99.6 mg/ml trenbolone enanthate…

No microbiological contamination was detected.

Discuss the Pharmacom Labs Pharma Mix 3 lab test results on the AnabolicLab Forum.

(The following images are photographs of the actual product that was submitted for testing.)

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

https://hardcore-underground.net/

 

[Steroidify_Rep]

Pharmacom Labs PHARMA Sust 250 is presented in a box containing ten 1-milliliter ammpules. Each ampule reportedly contains 250 milligrams of a blend of four testosterone esters per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of January 1, 2018 and February 28, 2018.

The samples were forwarded and received by the analytical laboratory SIMEC AG on February 28, 2018. SIMEC performed HPLC-UV quantitative dosage testing, ‘total aerobial microbiological count’ (TAMC) testing and ‘total yeast and mold count’ (TYMC) testing on March 9, 2018. The report was completed on March 27, 2018.
The product was identified with batch number of PHSU00001TA, a manufacture date of September 2016 and an expiration date of September 2020. The product code 7Lbhg9zXsK was verified as an authentic product at Pharmacom Labs - Code Site.

Label claim: Pharmacom Labs PHARMA Sust 250 has a label claim of 30 mg/ml testosterone propionate, 60 mg/ml testosterone phenylpropionate, 60 mg/ml testosterone isocaproate and 100 mg/ml testosterone decanoate.

Actual content: Pharmacom Labs PHARMA Sust 250 was determined to have an actual content of 31.0 mg/ml testosterone propionate, 61.0 mg/ml testosterone phenylpropionate, 61.7 mg/ml testosterone isocaproate and 99.9 mg/ml testosterone decanoate.

No microbiological contamination was detected.

Discuss the Pharmacom Labs PHARMA Sust 250 lab test results on the AnabolicLab Forum.

(The following images are photographs of the actual product that was submitted for testing.)

 

[Bigmurph6]

I love seeing simec results especially on the Primo 200 mg/ml I’m about to start using it. I can’t wait to only have to inject 1/ml and get 200mg. It gets exhausting inj 100mg/ml. Its alot of oil.
I was looking at the site the other day and seeing that the 200 is only $162 of vial that’s a great deal I’m going to have to get a couple more vials. I will be contacting you soon. Also the VAR top notch I started taking 50 mg I lowered it to 20 mg a day and I feel happy with the results I’m getting.
THANKS
Banned

 

[Steroidify_Rep]

Hello Guys ,

Starting today we’ll be adding lab tests for different products provided by all our current partners in this thread …We’ll be adding lab tests made to those products starting a few years ago because we want our customers to see clearly that the quality of the products that we sell is well established on the market and it was constant over the years.

Even though Pharmacom Labs products are not available anymore in our store we still sell only top quality products so we are still your trusted source for anything you need in this market.We have an impeccable reputation to keep up with and we cannot sell anything of lower quality than our previous and current standards.

Stay tuned.

Thank you

 

[Steroidify_Rep]

Dragon Pharma Oxymetholon is presented in a 100-tablet pouch and reportedly contains 50 milligrams of oxymetholone per tablet according to the label and packaging. Samples of this product were purchased from a European-based internet source between the dates of June 23, 2017 and August 14, 2017.

The samples were forwarded and received by the analytical laboratory SIMEC AG for HPLC-UV testing on August 14, 2017. The quantitative dosage test report was completed on September 28, 2017.

The product was identified with a lot number of “DPOXY-1701” and an expiration date of January 2020.

Label claim : Dragon Pharma Oxymetholon has a label claim of 50 mg oxymetholone per tablet .

Actual content : Dragon Pharma Oxymetholon was determined to have actual content of 48.3 mg oxymetholone per tablet .

Discuss the Dragon Pharma Oxymetholon lab test results on the AnabolicLab Forum.

View attachment 2667

 

[Steroidify_Rep]

Dragon Pharma Anavar is presented in a 100-tablet pouch and reportedly contains 10 milligrams of oxandrolone per tablet according to the label and packaging. Samples of this product were purchased from a European-based internet source between the dates of June 23, 2017 and August 14, 2017.

The samples were forwarded and received by the analytical laboratory SIMEC AG for HPLC-UV testing on August 14, 2017. The quantitative dosage test report was completed on September 25, 2017.

The product was identified with a lot number of “DPAN-1705” and an expiration date of May 2020.

Label claim: Dragon Pharma Anavar has a label claim of 10 mg oxandrolone per tablet.

Actual content: Dragon Pharma Anavar was determined to have actual content of 12.1 mg oxandrolone per tablet.

Discuss the Dragon Pharma Anavar lab test results on the AnabolicLab Forum.

791×1121 85.2 KB

 

[Steroidify_Rep]

ParaPharma Susta 350 is presented in a 10-milliliter multidose vial and reportedly contains 350 milligrams of a blend of three testosterone esters per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of January 1, 2018 and February 28, 2018.

The samples were forwarded and received by the analytical laboratory SIMEC AG on February 28, 2018. SIMEC performed HPLC-UV quantitative dosage testing, ‘total aerobial microbiological count’ (TAMC) testing and ‘total yeast and mold count’ (TYMC) testing on March 9, 2018. The report was completed on March 27, 2018.

The product was identified with batch number of PARA002 and an expiration date of August 2022.

Label claim : ParaPharma Susta 350 has a label claim of 200 mg/ml testosterone enanthate, 100 mg/ml testosterone cypionate and 50 mg/ml testosterone propionate .

Actual content : ParaPharma Susta 350 was determined to have an actual content of 192.0 mg/ml testosterone enanthate, 112.1 mg/ml testosterone cypionate and 58.2 mg/ml testosterone propionate .

No microbiological contamination was detected.

Discuss the ParaPharma Susta 350 lab test results on the AnabolicLab Forum.

More lab tests can be seen on our website , LAB TEST section.

794×1123 111 KB

 

[Steroidify_Rep]

Alpha Pharma Oxanabol is presented in a 50 tablet box with 5 blister packs of 10 tablets each. Each tablet reportedly contains 10 milligrams of oxandrolone according to the label and packaging. Samples of this product were purchased from a European-based internet source between the dates of October 15, 2017 and December 1, 2017.

The samples were forwarded and received by the analytical laboratory SIMEC AG on December 1, 2017. SIMEC performed HPLC-UV quantitative dosage testing. The report was completed on March 13 2018.

The product was identified with a manufacture date of October 2016, an expiration date of September 2019, a batch number as OX16004, the serial number as HSBC1N859F and the authentication code as D5sbdpkbh. The authenticity of the product was verified using the “Check Alpha” Android app.

Label claim: Alpha Pharma Oxanabol has a label claim of 10 mg/tablet oxandrolone.

Actual content: Alpha Pharma Oxanabol was determined to have actual content of 10.3 mg/tablet oxandrolone.

Discuss the Alpha Pharma Oxanabol lab test results on the AnabolicLab Forum.

More lab tests can be found on our website ,LAB TEST section .

791×1120 83.3 KB

 

[Steroidify_Rep]

ParaPharma Primo 100 is presented in a 10-milliliter multidose vial and reportedly contains 100 milligrams of methenolone enanthate per milliliter according to the label. Samples of this product were purchased from a European-based internet source between the dates of January 1, 2018 and February 28, 2018.

The samples were forwarded and received by the analytical laboratory SIMEC AG on February 28, 2018. SIMEC performed HPLC-UV quantitative dosage testing, ‘total aerobial microbiological count’ (TAMC) testing and ‘total yeast and mold count’ (TYMC) testing on March 9, 2018. The report was completed on March 14, 2018.

The product was identified with batch number PARA002 and an expiration date of August 2022.

Label claim: ParaPharma Primo 100 has a label claim of 100 mg/ml methenolone enanthate.

Actual contents: ParaPharma Primo 100 was determined to have an actual content of 95.3 mg/ml methenolone enanthate.

No microbiological contamination was detected.

Discuss the ParaPharma Primo 100 lab test results on the AnabolicLab Forum.

MORE LAB TESTS CAN BE FOUND ON OUR WEBSITE …LAB TESTS SECTION.

791×1117 93.1 KB

 

[Steroidify_Rep]

Hilma BioCare Methenolone Enanthate is presented in a 10-milliliter multidose vial and reportedly contains 100 milligrams of methenolone enanthate per milliliter according to the label. Samples of this product were purchased from a European-based internet source between the dates of January 1, 2018 and February 28, 2018.

The samples were forwarded and received by the analytical laboratory SIMEC AG on February 28, 2018. SIMEC performed HPLC-UV quantitative dosage testing, ‘total aerobial microbiological count’ (TAMC) testing and ‘total yeast and mold count’ (TYMC) testing on March 9, 2018. The report was completed on March 14, 2018.

The product was identified with batch number 037962 and an expiration date of January 2020.

Label claim: Hilma BioCare Methenolone Enanthate has a label claim of 100 mg/ml methenolone enanthate.

Actual contents: Hilma BioCare Methenolone Enanthate was determined to have an actual content of 99.5 mg/ml methenolone enanthate.

No microbiological contamination was detected.

Discuss the Hilma BioCare Methenolone Enanthate lab test results on the AnabolicLab Forum.

More tests can be found on our website… LAB TESTS section

791×1117 92.6 KB

 

[Steroidify_Rep]

SIS Laboratories Sustanon 250 is presented in a ten-milliliter multi-dose vial and reportedly contains 250 milligrams of a blend of four testosterone esters per milliliter according to label and/or packaging. Samples of this product were purchased from a European-based internet source between the dates of January 1, 2018 and February 28, 2018.

The samples were forwarded and received by the analytical laboratory SIMEC AG on February 28, 2018. SIMEC performed HPLC-UV quantitative dosage testing, ‘total aerobial microbiological count’ (TAMC) testing and ‘total yeast and mold count’ (TYMC) testing. The analysis was performed on March 9, 2018. The report was completed on March 27, 2018.

The “batch number” listed on the product was 001-30540. The manufacture date was listed as January 2016 and the expiration date as January 2020. The verification code “AK1ADWJ” was successfully used to verify the authenticity of the product on sislabs.net.

Label claim: SIS Laboratories Sustanon 250 has a label claim of 50 mg/ml testosterone propionate, 50 mg/ml testosterone phenylpropionate, 50 mg/ml testosterone isocaproate and 100 mg/ml testosterone decanoate.

Actual content: SIS Laboratories Sustanon 250 was determined to have an actual content of 53.7 mg/ml testosterone propionate, 52.7 mg/ml testosterone phenylpropionate, 55.3 mg/ml testosterone isocaproate and 102.9 mg/ml testosterone decanoate.

No microbiological contamination was detected.

More lab tests can be found on our website … LAB TEST section

794×1123 119 KB