Need Some Help Identifying Compound

[Flyboy84]

It’s supposed to be Primo. Pic 1 is the immediate reaction. Pic 2 is about three min later. It’s hard to tell, but tube D held up to light it is a coke color brown. I couldn’t get a clear pic, but tube B has a weird black light reaction. It looks like it separated and half has a neon white/purple and the part that changed color under regular light has no reaction.

Anyone have an idea of what this is? It’s s not lining up with anything on the website.

 

[Bigmurph6]

It could be legit it could be fake with methenolone you have to do the D amp and watch it from the second the compound hits the reactive. It needs to go from what actually seems like shit lavender if I had to give it a name and you need to turn the amp sideways to let the light pass through the liquid to see the real color or all you see is brown, purple,or black.

The fact that B has no reaction is good but should be darker whats the carrier oil and what solvents were used? In that second picture amp D looks close but I can’t tell without light going through the liquid

 

[Flyboy84]

After about 10 min amp D is definitely brown and not purple, which is a good sign.

I’m not sure what the carrier is, but it also glows under black light. It looks like it is separating when it hits the chemical in the amp. The color in the amp has no black light reaction. Has anyone heard of something like this happening?

 

[Bigmurph6]

That’s what’s supposed to happen see where it shows the color for amp B and then the next box says NS that means no show no color change should happen under black light.

 

[Bigmurph6]

After about 10 min amp D is definitely brown and not purple, which is a good sign.

Could be drostanolone enanthate or could be the correct color does it match?

 

[Flyboy84]

Amp D was never purple. I think that is a pretty solid match to what was expected. Amp B is what’s got me questioning things; it just didn’t get as dark as the card.

 

[Bigmurph6]

Amp D is the important amp for methenolone enanthate because drostanolone enanthate comes very close in amp B and D is different but also a shade of brown after time.
If D matches I believe that you have a positive result.
I can’t really tell you yes or know because I wasn’t there for the entire test

 

[Bigmurph6]

The colors in the picture don’t even look the same as the book I just took the picture from so no the best reference sample

 

[Kad1]

Amp D should be purple not brown

 

[Bigmurph6]

Not purple or brown its different that’s what separates it from the rest of the purple D compounds and drostanolone enanthate if you have the book take a look and you will see its not the same color purple it is closer to brown I still call it shit lavender

That is D amp for methenolone enanthate
The one below is nandrolone deconate with the normal purple color that most D amps show for hormone

 

[Raphael3636]

I’m gonna be honest here… But I’ve been noticing alot of members having trouble reading there roidtests, and there’s alot of variables involved. I think it would be a good idea for @ROIDTEST or @Bigmurph put up a detailed video on proper procedures, measurements, what to look for, what fillers can throw off results and so on… I personally never used roid test due to my hands being way to shakey for small tasks like this, there is no way I would be able to get a match heads amount of compound into a tiny vial, and how much is exactly a match heads worth? In no way shape or form am I berating roid test or there product , so please don’t jump to that conclusion, but I really think a detailed tutorial would be of great assistance. For example I want to test my gh with @ROIDTEST and obviously have my wife do the procedure and a video would be of tremendous assistance for her and myself

 

[Bigmurph6]

I can’t even answer this question because of how mad I am about this situation.
Not at you brother but at people who can’t easily use common sense and match colors. Thats all a roidtest requires.
We have had many members test and boom it instantly shows that its what it should be or it shows that it isn’t and that’s how simple the test is and the results.

Yes roidtest are made from testing pharmacy grade products that’s where the original colors come from so if you’re doing a test just use common sense and say
Hey that tablet is covered in a red coating probably just want the stuff on the inside?
Hey the carrier oil is gso not mct gso is dark mct is clear use common sense to look at the colors they might be dark in gso and a little bit lighter in mct?
Hey I have capsules which have alot of filler usually baking soda, creatine,protein or whatever is used to fill. Baking soda is a reactive product it will bubble up and get hot because of a chemical reaction just like in school or for those who didn’t attend school like when cooking crack but even though you have all these different fillers it doesn’t matter pop the capsule open stir content and test if there’s hormone it will show up and if your test goes to shit while testing caps ask your sponsor to use less cutting agents in there orals its completely possible?
Hey tablets should I just break off this little piece from the side NO break the whole damn thing crush remove coating and stir then add to test get results?

@Raphael3636 none of this is meant for you I just want to make sure you know that this is for the community. I don’t want you to think I got upset at you for this question im not at all im glad you asked but I hate having to answer it? You know what I mean? I honestly can’t understand why people have the problems that they do when testing.

Ask questions before you test because I believe this is the real problem. Not one person has asked a question about a roidtest before testing until now with @Raphael3636 asking about the hgh test kit which I would be happy to help but its always after they already did the test and I know that they didn’t read the instructions because there asking questions that are in the instructions which could have saved the test if you read them and understand them before you test. I could probably recite word for word the instructions but please read the instructions if you don’t understand post and ask take a picture and say this is where im at I don’t understand ________________ fill in the blank and I would be happier than you can imagine to help rather than after its already fucked it gets posted and its to late to help its to late to read the results because most are timed results.
I will not help those who act helpless don’t get a test and then just make a post asking me to help.
I need you to research in this case research would be read the instructions. Then if you don’t understand ask a question don’t just ask how because that tells me that you didn’t read the instructions.

If there’s questions ask me about how to test and what you don’t understand don’t ask just a blanket question how do I test.

 

[Bigmurph6]

We can’t do video the files are too large to post unless its posted through YouTube first so I have never been able to post a video. Going back to teaching people how to reconstitute with just pictures was hard but we got it done and everyone figured it out.

I believe that just with the instructions your wife can easily perform the test. I have a hgh test I will go open and take a look at the instructions.

 

[Raphael3636]

Thanks brotha, it only makes sense to me to ask questions if I’m getting ready to dive into something I’ve never done.

 

[Bigmurph6]

Im glad you asked prior the questions afterwards I feel helpless because I can do nothing and give no advice

 

[Raphael3636]

Hahaha once you fuck something up you can’t unfuck it